Copyright © 2024 Norvi.io
We using safe payment for
NORVI IIOT-AE03 – Datasheet
3 min read
Table of Contents
Product Features #
- ESP32-WROOM32 Module
- Built-in Button on the front panel
- Digital Inputs
- Analog Input
- DIN-Rail mounts
- Supports Expansion ports
Expansions Supported
- Digital Input
- Analog Input
Main #
| Range of Product | NORVI IIOT |
| Product type | Programmable Controller |
| Certifications | EN 61131-2:2007 EN 61010-1:2010+A1:2019 EN IEC 61010-2-201:2018 2014/30/EU- Electromagnetic Compatibility (EMC) Annex III, Part B, Module C |
| Rated supply voltage | 24V DC |
| Communication | WiFi 2.5GHz / Bluetooth |
| Inputs and Outputs | 8 x Digital Inputs 1 x Analog Inputs with 0–10V |
| Displays and Visual Indicators | LED |
Complementary #
| Product Unified Code | NORVI IIOT-AE03 |
| Product Part Numbers | NORVI IIOT-AE03 |
Mechanical Properties #
| Enclosure | NORVI 204 |
| Mounting / Installation Method | DIN RAIL / MOUNTING TABS |
| Terminal Type | SCREW TERMINAL |
| Terminal Arrangement | Top and Bottom |
| Length | 90.50 mm |
| Height | 56.60 mm |
| Width | 60.60 mm |
Environment #
| IP degree of protection | IP20 |
| Operating altitude | 0–2000 meters |
| Operating Temperature | – -10… +85° C (14…185 °F) |
| Storage altitude | 0–3000 meters |
| Shock resistance | 15 gn for 11ms |
| Resistance to electrostatic discharge | 4 kV on contact 8 kV on air |
| Resistance to electromagnetic fields | 10 V/m (80 MHz …… 1GHz) 3 V/m (1.4 MHz …… 2 GHz) 1 V/m (2 MHz …… 3 GHz) |
Electrical Characteristics #
Grid Powered Devices #
| Rated Supply Voltage (V) | 24V DC |
| Current Consumption (mA) | 400mA |
| Recommended Power Source | 1A, 24V DC |
Processing #
| SOC / MCU | ESP32-WROOM32 |
| Flash Memory | 4MB |
| ROM | 448 KB |
| SRAM | 520 KB |
| PSRAM | NOT AVAILABLE |
Peripherals #
Built-in Buttons #
| Button 1 Pin | GPIO32 Analog Input Level 1 |
| Button 2 Pin | GPIO32 Analog Input Level 2 |
| Button 3 Pin | GPIO32 Analog Input Level 3 |
INPUTS and OUTPUTS #
Digital Inputs #
| Number of Digital Inputs | 8 |
| Digital Input Polarity | Sink and Source |
| Digital Input Maximum Voltage | 32V DC |
| Digital Input Minimum Voltage | 18V DC |
| Maximum Switching Frequency | 1 kHZ |
| Terminal Arrangement | Digital Input 0 – GPIO18 Digital Input 1 – GPIO39 Digital Input 2 – GPIO34 Digital Input 3 – GPIO35 Digital Input 4 – GPIO19 Digital Input 5 – GPIO21 Digital Input 6 – GPIO22 Digital Input 7 – GPIO23  |
Analog Inputs #
| Number of Analog Inputs | 1 |
| Analog Input Measurement Range | 0 – 10V |
| Analog to Digital Converter (ADC) | built-in ADC |
| Terminal Arrangement | A0 : Analog Input 0 – GPIO33 |
GPIO Map #
| GPIO | Description | Usage |
| 0 | outputs PWM signal at boot | NRST |
| 1 | debug output at boot | |
| 2 | connected to on-board LED | |
| 3 | HIGH at boot | RX |
| 4 | ||
| 5 | outputs PWM signal at boot | TX |
| 6 | connected to the integrated SPI flash | |
| 7 | connected to the integrated SPI flash | |
| 8 | connected to the integrated SPI flash | |
| 9 | connected to the integrated SPI flash | |
| 10 | connected to the integrated SPI flash | |
| 11 | connected to the integrated SPI flash | |
| 12 | input only | |
| 13 | input only | |
| 14 | Outputs PWM signal at boot | |
| 15 | Outputs PWM signal at boot | |
| 16 | SDA | |
| 17 | SCL | |
| 18 | SCLK | Digital Input 0 |
| 19 | MISO | Digital Input 4 |
| 20 | ||
| 21 | input only | Digital Input 5 |
| 22 | input only | Digital Input 6 |
| 23 | MOSI | Digital Input 7 |
| 24 | ||
| 25 | Expansion Port | Pin 1 |
| 26 | ||
| 27 | ||
| 28 | ||
| 29 | ||
| 30 | ||
| 31 | ||
| 32 | Analog Input | Buttons |
| 33 | Analog Input 0 | |
| 34 | input only | Digital Input 2 |
| 35 | input only | Digital Input 3 |
| 36 | input only | |
| 37 | ||
| 38 | ||
| 39 | input only | Digital Input 1 |
Expansion Port #
| PIN | ESP32 Connection |
| 1 | IO25 |
| 2 | TXD0 |
| 3 | NOT CONNECTED |
| 4 | RXD0 |
| 5 | BOOT IO0 |
| 6 | IO32 |
| 7 | NOT CONNECTED |
| 8 | SCL – GPIO17 |
| 9 | GROUND |
| 10 | SDA – GPIO16 |