Custom Industrial IoT Development
Build the Industrial IoT Hardware Your Application Actually Needs
From proof of concept to production-ready controllers, HMIs and connected devices. NORVI helps you move from requirement to deployable hardware.
Industrial-Grade
PlatformsControllers, HMIs, sensor nodes and expansion I/O built for real
deployments.
Custom
DevelopmentAdapt hardware, communications and I/O around your application
requirements.
Documentation
& SupportProduct documentation and technical support to shorten integration
time.
Worldwide
DeploymentHardware platforms designed for automation and remote monitoring projects
globally.
Featured Products
Featured NORVI Platforms
Highlighted products, new releases and key industrial IoT platforms.
OFF-GRID REMOTE MONITORING
EC-M12 Battery-Powered Data Logger
IP6738,000mAh4–20mACellular / LPWAN
Built for remote sensor deployments with dual 4–20mA inputs, sensor power, microSD logging and low-power operation.
Typical Architecture Live Path
SensorEC-M12LTE-M / NB-IoTCloud /
SCADA
MODULAR PLC / SCADA INTEGRATION
NORVI X Modular Industrial Controller
ESP32-S3RS-485EthernetExpandable I/O
A configurable industrial platform with digital and analog I/O, relay and transistor outputs, RTD, thermocouple and Modbus options.
Typical Architecture Live Path
Machine I/ONORVI XModbus
/ LANSCADA /
HMI
Industrial Architecture
From Field Signal to SCADA, HMI or Cloud
NORVI platforms sit between industrial field devices and supervisory systems, acquiring signals, executing control logic and moving data through industrial networks.
DATA PATH // ACTIVE
01
FIELD LAYERSensors & Machine Signals
Acquire process values, machine states and field-device data.
02
CONTROL + EDGENORVI Controller Layer
Condition signals, log data, execute logic and bridge field devices.
03
INDUSTRIAL NETWORKConnectivity & Protocols
Move machine and process data through wired or wireless networks.
04
SUPERVISORY LAYERSCADA, HMI & Cloud
Visualize, supervise, store and act on industrial data.
REFERENCE ARCHITECTURES
Three common ways NORVI products can be positioned in an automation system.
REMOTE TELEMETRYOff-grid / remote assets
SensorEC-M12 / M11CellularCloud /
SCADA
FACTORY AUTOMATIONMachine and process control
Machine I/ONORVI X / ENETModbus /
LANSCADA / HMI
EDGE HMILocal operator interface
PLC / SensorsNORVI HMIRS-485 /
LANOperator / SCADA
Product Range
Need help choosing? Talk to our teamFind the Right NORVI Platform
Compare the core purpose and key interfaces first. Open a product page when you need full specifications, documentation, variants and application details.
MACHINE VISION / EDGE AI
NORVI AI Optic
ESP32-S3 edge camera for embedded vision and remote visual monitoring.
- 2-inch LCD + autofocus
- microSD + external trigger
- 800mAh backup + USB-C
View Product
Engineering FitVisual
inspection, machine vision and edge image capture
ESP32-S3CameramicroSDTrigger
Typical Architecture Signal Flow
Image / TriggerAI OpticEdge
ProcessLCD / Storage
Best when the application needs local image capture, an operator display, storage and external triggering close to the machine.
Configure your requirements
PLC + HMI / EDGE COMPUTING
NORVI RPI-HMI
Raspberry Pi CM4 panel HMI with industrial communications and PLC-ready I/O.
- Ethernet + RS-485
- Digital + analog inputs
- Transistor outputs + Modbus
View Product
Engineering FitAdvanced
operator interface, edge applications and industrial visualization
RPI
CM4RS-485EthernetModbus
Typical Architecture Signal Flow
Machine I/ORPI-HMIRS-485 /
LANSCADA / Edge
Use it when Raspberry Pi CM4 compute, panel visualization and industrial communications need to be combined in one device.
Configure your requirements
MACHINE HMI / LOCAL CONTROL
NORVI ESP32 HMI
ESP32-S3 touch HMI for compact machine control, visualization, and connectivity.
- 5-inch touch display
- Ethernet + RS-485
- microSD + RTC + industrial I/O
View
Product
Engineering FitCompact
machine control with touchscreen visualization
ESP32-S3Touch
HMIRS-485Ethernet
Typical Architecture Signal Flow
Sensors / DIESP32 HMIRS-485 /
LANMachine Control
A strong fit where the operator interface, ESP32-S3 control logic and industrial communications must live in one panel.
Configure your requirements
CELLULAR TELEMETRY / REMOTE I/O
NORVI GSM
ESP32 cellular controller for remote monitoring and industrial LTE/GSM applications.
- SIM800C / Quectel EC25
- OLED + microSD + RTC
- Relay + 0–10V / 4–20mA I/O
View
Product
Engineering FitRemote
equipment monitoring where wired internet is unavailable
LTE / GSM4–20mA0–10VRelay
Typical Architecture Signal Flow
Field SensorNORVI GSMCellularCloud / SCADA
Use it when field signals must be acquired locally and sent over GSM/LTE to a remote supervisory or cloud system.
Configure your requirements
WI-FI AUTOMATION / INDUSTRIAL I/O
NORVI IIOT
Wi-Fi ESP32 industrial controller for automation, sensing, and connected control.
- OLED + microSD + RTC
- Digital / relay / transistor / PWM
- 0–10V + 4–20mA I/O
View Product
Engineering FitConnected
control panels and general-purpose industrial automation
Wi-FiDigital I/OAnalog
I/ORTC
Typical Architecture Signal Flow
Field I/ONORVI IIOTWi-FiApp /
Cloud
Choose it for local control, mixed industrial I/O and Wi-Fi-connected applications that need an ESP32 platform.
Configure your requirements
ETHERNET AUTOMATION / WIRED CONTROL
NORVI ENET
ESP32 industrial Ethernet controller built around the W5500 for wired automation.
- W5500 Ethernet
- Digital inputs + relay outputs
- 0–10V / 4–20mA + RTC
View Product
Engineering FitReliable
wired industrial control and Ethernet-connected automation
W5500EthernetAnalog
I/ORelay
Typical Architecture Signal Flow
Field I/ONORVI ENETEthernetPLC / SCADA
Best when the installation favors deterministic wired connectivity and local industrial I/O over a wireless uplink.
Configure your requirements
IIOT GATEWAY / WIRELESS TELEMETRY
Agent One
ESP32-WROVER gateway for wireless monitoring, telemetry, and industrial integration.
- Wi-Fi + LoRa + NB-IoT
- Digital inputs
- Analog + transistor outputs
View
Product
Engineering FitWireless
telemetry, edge gateways and distributed monitoring
Wi-FiLoRaNB-IoTField I/O
Typical Architecture Signal Flow
Field SignalAgent OneWirelessIoT Platform
Useful when a gateway must bridge field signals into Wi-Fi, LoRa or NB-IoT based telemetry architectures.
Configure your requirements
MODULAR I/O / SYSTEM EXPANSION
Expansion Modules
Extend NORVI controllers with additional sensing, I/O, and communication options.
- Analog / digital / relay / transistor
- Temperature + load-sensor options
- For IIOT, ENET and GSM
View Product
Engineering FitIncrease I/O
capacity without replacing the main NORVI controller
I²CAnalogDigitalRelay
Typical Architecture Signal Flow
NORVI PLCI²C BusExpansionMore Field I/O
Use expansion modules when the controller platform is correct but the application needs additional sensing or output channels.
Configure your requirements
PROCESS SENSING / ANALOG INPUT
Analog Input Expansion
High-resolution analog input expansion for common industrial sensor signals.
- 16-bit analog inputs
- 0–10V / 4–20mA
- ADS1115 I²C + configurable address
View Product
Engineering FitAdditional
4–20mA and 0–10V process sensor channels
16-bit4–20mA0–10VI²C
Typical Architecture Signal Flow
Process SensorAnalog InputI²CNORVI PLC
Designed for process instrumentation where more high-resolution industrial analog inputs are required.
Configure your requirements
PROCESS CONTROL / ANALOG OUTPUT
Analog Output Expansion
Industrial analog output expansion for actuators, drives, and process control.
- 0–10V / 4–20mA outputs
- 12-bit resolution
- I²C communication
View Product
Engineering FitGenerate
analog setpoints for drives, valves and actuators
0–10V4–20mA12-bitI²C
Typical Architecture Signal Flow
NORVI PLCI²CAnalog
OutputDrive / Valve
Use it when the automation system needs additional 0–10V or 4–20mA output channels for process control.
Configure your requirements
MACHINE STATUS / DIGITAL INPUT
Digital Input Expansion
I²C digital expansion for adding more industrial channels to a NORVI controller.
- 24V industrial I/O
- MCP23008 / MCP23017
- Configurable I²C address
View Product
Engineering FitAdd more
machine-state, switch and digital field inputs
24V I/ODigital
InputI²CExpansion
Typical Architecture Signal Flow
Switch / StatusDigital
InputI²CNORVI PLC
A practical expansion path when the application needs more industrial digital channels without changing the main controller.
Configure your requirements
DC LOAD CONTROL / TRANSISTOR OUTPUT
Transistor Output Expansion
Optically isolated transistor outputs for fast, reliable industrial switching.
- Open-collector outputs
- Loads up to 24V DC
- MCP23008 / MCP23017 I²C
View Product
Engineering FitFast DC
switching for indicators, relays and solid-state loads
24V
DCTransistorIsolatedI²C
Typical Architecture Signal Flow
NORVI PLCI²CTransistor
OutDC Load
Choose this when the controller requires additional isolated transistor output channels for DC field devices.
Configure your requirements
LOAD SWITCHING / RELAY OUTPUT
Relay Output Expansion
Relay expansion for switching AC or DC loads from NORVI controller platforms.
- 5A relay outputs
- 30V DC / 250V AC switching
- MCP23008 / MCP23017 I²C
View Product
Engineering FitAdditional
contact outputs for AC or DC load switching
5A Relay30V DC250V ACI²C
Typical Architecture Signal Flow
NORVI PLCI²CRelay
OutputAC / DC Load
Best when the application needs extra relay channels for contactors, lamps, valves or other switched loads.
Configure your requirements
OUTDOOR MONITORING / GRID POWERED
M11 E Series
Grid-powered IP67 sensor node for remote industrial monitoring deployments.
- ESP32 platform
- Wi-Fi / NB-IoT / GSM-LTE
- IP67-rated enclosure
View Product
Engineering FitIP67 field
monitoring where continuous site power is available
IP67Wi-FiNB-IoTGSM/LTE
Typical Architecture Signal Flow
Field SensorM11 EWirelessCloud /
SCADA
Use it for outdoor or distributed sensing where a rugged enclosure and wireless connectivity are required with grid power.
Configure your requirements
OFF-GRID MONITORING / SOLAR + BATTERY
M11 B Series
Battery and solar-ready IP67 sensor node for low-power remote monitoring.
- Battery / solar powered
- 12V sensor power output
- IP67-rated enclosure
View Product
Engineering FitLow-power
remote monitoring without permanent mains power
BatterySolarIP6712V
Sensor
Typical Architecture Signal Flow
Field SensorM11 BWirelessCloud / SCADA
Best for solar or battery-supported field monitoring where rugged deployment and low-power operation are priorities.
Configure your requirements
Engineering Product Selector
Define the Application Before Choosing the Controller
Select the requirements you already know. This does not automatically assign a product. It creates a concise engineering brief that makes product selection faster.
REQUIREMENT CAPTURE // READY
01 / POWER
Power Source
02 / NETWORK
Connectivity & Protocol
03 / FIELD I/O
I/O & Sensor Signals
04 / DEPLOYMENT
Environment & Installation
Popular Starting Points
Explore by Application
Jump directly to custom development or one of NORVI's core controller families.
IoT Product Development
Custom hardware and embedded product development around your application.
Start a Custom Project
NORVI GSM
Cellular industrial controller for remote monitoring and connected equipment.
Explore NORVI GSM
Why NORVI
Designed to Reduce Integration Friction
Choose a standard industrial platform when it fits, then extend or customize when your application needs more.
01
Custom Solutions
Tailor hardware and software configurations around the requirements of your application.
02
Industrial Reliability
Industrial-focused platforms, connectors and I/O designed for automation and field use.
03
Engineering Support
Access product documentation and technical support throughout integration and deployment.
04
Scalable Platforms
Start with the I/O and communications you need, then expand as the deployment grows.
05
Flexible Connectivity
Choose from Wi-Fi, Ethernet, cellular, RS-485, LoRa and other industrial communication options.
06
Broad I/O Coverage
Connect common industrial digital, relay, transistor, 0–10V, 4–20mA and sensor interfaces.
07
Custom Product Path
Move beyond standard products when your enclosure, PCB, I/O or communication requirements are unique.
08
Global Applications
NORVI platforms support remote monitoring and automation projects across varied industries and regions.
Solutions & Applications
Start with the Problem You Need to Solve
Instead of browsing posts by date, explore practical application paths that connect your requirement to the most relevant NORVI platform.
Remote Infrastructure & Unmanned Assets
Monitor pipelines, tanks, boreholes, utilities and distributed field assets where mains power and frequent maintenance visits are impractical.
Best-fit platform
EC-M12 battery-powered cellular IoT data logger
Explore SolutionCold Storage & Temperature Monitoring
Build continuous temperature monitoring, logging and alert-ready systems for cold rooms, storage facilities and temperature-sensitive operations.
Best-fit platform
NORVI X with RTD expansion for multi-point temperature sensing
Explore SolutionESP32 PLC, SCADA & Machine Integration
Connect industrial I/O, Modbus devices, Ethernet, Wi-Fi and control logic in a programmable platform designed for automation projects.
Best-fit platform
NORVI X and NORVI industrial ESP32 controller families
Explore SolutionCustom Industrial IoT Product Development
Go beyond a standard controller when your project requires custom PCB design, enclosure changes, unique I/O, communications or production support.
Best-fit path
Custom hardware and embedded product development with NORVI
Start a Custom Project
About NORVI
Industrial IoT Hardware Built Around Real Applications
NORVI develops industrial IoT controllers, HMIs, data loggers and expansion platforms for automation, remote monitoring and connected equipment.
Need a standard controller or a custom solution? Start with the product range when your requirements are known, or speak with the team when you need help matching power, connectivity, I/O and enclosure requirements.