---
title: "NORVI-EX-Q8 – DATASHEET"
description: "## **Product Features** ![](https://norvi.io/wp-content/uploads/2024/09/NORVI-EX-Q8_Summary-Image-761x1024-1.jpg) - Optically Isolated Transistor Outputs - Supports up to loads of 36V DC - 300mW Power Dissipation - MCP23008 Port Expander - Address Configurable Over DIP Switch **Expansions Supported** - Open Collector Transistor Outputs ![](https://norvi.io/wp-content/uploads/2024/09/expansion-only-1024x1018-3.png) ##…"
url: "https://norvi.io/docs/norvi-ex-q8-datasheet/"
updated: "2026-04-07"
category: "OTHER PRODUCTS / NORVI TRANSISTOR OUTPUT EXPANSION / NORVI EX-Q8"
---

# NORVI-EX-Q8 – DATASHEET

## **Product Features**

![](https://norvi.io/wp-content/uploads/2024/09/NORVI-EX-Q8_Summary-Image-761x1024-1.jpg)

- Optically Isolated Transistor Outputs
- Supports up to loads of 36V DC
- 300mW Power Dissipation
- MCP23008 Port Expander
- Address Configurable Over DIP Switch

**Expansions Supported**

- Open Collector Transistor Outputs

![](https://norvi.io/wp-content/uploads/2024/09/expansion-only-1024x1018-3.png)

## **Main**

| Range of Product | NORVI Expansion |
| --- | --- |
| Product Type | Expansion Module |
| Certifications | EN 61131-2:2007 EN 61010-1:2010+A1:2019 EN IEC 61010-2-201:2018 2014/30/EU- Electromagnetic Compatibility (EMC) Annex III, Part B, Module C  |
| Rated supply voltage | 24V DC |
| Communication | I2C |
| Inputs and Outputs | 8 x Open Collector Transistor Outputs |
| Displays and Visual Indicators | 1 LED green |

## **Complementary**

| Product Unified Code | NORVI EX-Q8 |
| --- | --- |
| Product Part Numbers  | NORVI EX-Q8 |

## **Mechanical Properties**

| Enclosure | NORVI 202 |
| --- | --- |
| Mounting / Installation Method | DIN RAIL / MOUNTING TABS |
| Terminal Type | Top hat type TH35-15 rail conforming to IEC 60715 Top hat type TH35-7.5 rail conforming to IEC 60715 Plate or panel with fixing kit |
| Terminal Arrangement | Top and Bottom |
| Length | 59.00 mm |
| Height | 86.00 mm |
| Width | 35.00 mm |

![](https://norvi.io/wp-content/uploads/2024/09/unnamed-100.png)

## **Environment**

| IP degree of protection  | IP20 |
| --- | --- |
| Operating altitude  | 0 - 2000 meters |
| Operating Temperature  | - –10 … +85° C (14...185 °F) |
| Storage altitude  | 0 - 3000 meters |
| Shock resistance  | 15 gn for 11 ms |
| Resistance to electrostatic discharge  | 4kV on contact   8 kV on air |
| Resistance to electromagnetic fields  | 10 V/m (80 MHz ...... 1GHz)    3 V/m (1.4 MHz ...... 2 GHz)    1 V/m (2 MHz ...... 3 GHz) |

## **Electrical Characteristics**

### *Grid Powered Devices*

| Rated Supply Voltage (V) |   24V DC  |
| --- | --- |
| Current Consumption (mA) |   400mA |
| Recommended Power Source |   1A, 24V DC |

## **Processing**

| SOC / MCU | 8-bit-I/O Expander with Serial Interface |
| --- | --- |
| Module  | MCP230008 |
| Operating supply voltage | 2.4V to 3.6V |
| Resolution | 16bit |
| I2C SDA | GPIO16 |
| I2C SCL | GPIO17 |

## **INPUTS and OUTPUTS**

### **Transistor Outputs**

| Number of Transistor Outputs |   8 |
| --- | --- |
| Transistor Output Type |   OPEN COLLECTOR |
| Maximum Sink/Source Current (mA) |   100mA  |
| Maximum Applicable Voltage |   36V DC  |
| Maximum Switching Frequency |   1 kHz |
| Terminal Arrangement | T1 - GP7   T2 - GP6   T3 - GP5   T4 - GP4    T5 - GP3   T6 - GP2   T7 - GP1   T8 - GP0 |

## **I2C Address Setting**

The I2C address of the expansion module can be configured by switching DIP switches at the bottom of the expansion module. The device can be configured at 8 I2C addresses using the first 3 DIP switches.

![](https://norvi.io/wp-content/uploads/2024/09/24-9.jpg)

## **Expansion Port**

![](https://norvi.io/wp-content/uploads/2024/09/unnamed-18-1024x377.jpg)

| **PIN** | **ESP32 Connection** |
| --- | --- |
| 1 | TXD0 |
| 2 | GPIO25 |
| 3 | RXD0 |
| 4 | AUX1 |
| 5 | GPIO15 |
| 6 | NRST |
| 7 | SCL2 |
| 8 | AUX2 |
| 9 | SDA2 |
| 10 | GND |
